-
About Us
NEWS
Shantou Kaifu Machinery Co.,Ltd.
27
2022
-
12
Heating system of CNC sheet feed press from China
The heating system of a CNC sheet feed press from China is composed of a steel heating plate, heating pipe, and insulation layer. The heating plate of a CNC sheet feed press from China is divided into upper and lower parts, which are fixedly connected with the base of the press and the pressure row respectively, and are easy to disassemble.
The heating plate of the CNC sheet feed press from China is made of high-quality 45# steel quenched and tempered. Place electric heating tubes and thermocouples on the heating plate. The thermocouple is placed and fastened reliably, and is easy to disassemble. Heating plate technical parameters: plane size 3050×650 mm2; flatness 0.2 mm; measurement point layout: 3 points on the upper plate; 6 points on the lower plate.
The outer casing of the heating tube of the CNC sheet feed press from China is made of stainless steel, and the working voltage is 220V. One-sided outlet, the number is a multiple of 3. The electric heating tube is easy and reliable to replace. There is a protective device at the wiring. The insulation layer is set between the heating plate and the base (or pressure row), and the heating plate is surrounded by insulation side panels. It should be made of materials with good heat insulation performance. The plane size is equivalent to that of the heating plate, and the thickness is not less than 20 mm.
Through the above introduction and analysis of the Heating system of a CNC sheet feed press from China, hope it helps you.
We have a strong technical team with more than 18 years experience focusing on can making machines.
Contact Us
Add: A3, 2nd Bldg, Kaiser Industrial City, No. 3, Zhujin 1st Street, Zhujin Industrial
Area, Longhu, Shantou 515000, China
Tel:+86 754 89926848
Fax:+86 754 89926848
Mobile: +8613809675684
All rights reserved：© Shantou Kaifu Machinery Co.,Ltd.