NEWS

Shantou Kaifu Machinery Co.,Ltd.

Home page

2023

Features of CNC sheet feed press in china

The control cabinet is a combined cabinet for the operation and temperature of the CNC sheet feed press in china. Instruments and switches on the cabinet panel; power switch, indicator light, voltmeter, ammeter; press action button and indicator light; pressure indicator instrument; heating switch and indicator light; digital display temperature regulator (accuracy ±1°C); heat preservation timer device, over-temperature alarm.

The maximum operating temperature of a CNC sheet feed press in China is 180°C; the heating rate is 1.7°C~2.5°C/min; the temperature unevenness is ±3°C, and the heating power of each phase power supply is balanced; the temperature regulator controls the corresponding temperature measurement area in real time, When all reach the set value ±3°C, the timer counts. After reaching the set time, the temperature control system can automatically heat up or cut off the power according to the process set value.
CNC sheet feed press in china's mold delivery frame, the frame is a structure with rollers on the upper part, one end is connected to the base of the press (detachable), and the other end is placed on the ground (height can be adjusted). The bearing capacity is 3T; the upper surface of the height rolling is flush with the lower heating plate; the plane size (2800~2900)×750mm2 (usable part); the heat insulation board is placed around the press row and the base of the press to reduce the mold heating process Heat loss, made of the aluminum plate (or stainless steel plate) and insulation material. It can be divided into several blocks for ease of placement.
Through the above introduction and analysis of the features of a CNC sheet feed press in China, hope it helps you.

NEWS

Features of CNC sheet feed press in china

Contact Us